Niagara Cutter 17013557 RHC752 Center Cutting Single End Stub Length End Mill, 3/4 in Dia Cutter, 0.04 in Corner Radius, 3/4 in Length of Cut, 3 Flutes, 3/4 in Dia Shank, 3 in OAL, TiCN Coated
NIACUT 17013557
$83.57
/ EA
Out of Stock
- Mill Diameter: 3/4 in
- Mill Diameter - Decimal: 0.75 in
- Mill Diameter - Fractional: 3/4 in
- Mill Diameter - Metric: 19.05 mm
- Pitch: Coarse
- Length of Cut: 3/4 in
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- End Type: Square
- Material: HSS-Co8
- Finish/Coating: TiCN
- Overall Length: 3 in
- Centercutting: Center Cutting
- Helix Angle: 36 deg
- Chamfer Angle: 45 deg
- Chamfer Width: 0.04 in
- Chamfer Width - Decimal: 0.04 in
- Chipbreaker: No
- Corner Radius: 0.04 in
- Cutter Diameter: 3/4 in
- Cutter Diameter - Fractional: 3/4 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Diameter - Fractional: 3/4 in
- Flute Direction: Right Hand
- Length of Cut - Decimal: 0.75 in
- Length of Cut - Fractional: 3/4 in
- Length of Cut - Metric: 19.05 mm
- Number of Flutes: 3
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Series: RHC752
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Type: Center Cutting
- Variable Helix: No
- Flute Type: Spiral
- Diameter - Metric: 19.05 mm
- Variable Index: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Center Cutting Single End Stub Length | Series: RHC752 | 3/4 in Cutter Dia | 0.04 in Corner Radius | 3 in Overall Length | 3/4 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 3/4 in Shank Dia | Right Hand Cutting | 36 deg Helix Angle | Weldon Flat Shank | ANSI Code: RHC752-0.750-D1-C040.3-Z3 | ISO Code: RHC752.750D1C040.3Z3 | M42 HSS-Co 8 | TiCN Coated