Niagara Cutter 17014100 REM710 Non-Center Cutting Single End Stub Length End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 2-7/8 in OAL, Uncoated
NIACUT 17014100
$62.78
/ EA
Out of Stock
- Mill Diameter: 5/8 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.87 mm
- Pitch: Coarse
- Length of Cut: 3/4 in
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- End Type: Square End
- Material: HSS-Co8
- Finish/Coating: Bright / Uncoated
- Overall Length: 2-7/8 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Chamfer Width: 0.03 in
- Chamfer Width - Decimal: 0.03 in
- Chipbreaker: No
- Corner Radius: 0.03 in
- Cutter Diameter: 5/8 in
- Cutting Direction: Right Hand
- Diameter: 5/8 in
- Diameter - Fractional: 5/8 in
- Length of Cut - Decimal: 0.75 in
- Length of Cut - Fractional: 3/4 in
- Length of Cut - Metric: 19.05 mm
- Number of Flutes: 4
- Overall Length - Decimal: 2.875 in
- Overall Length - Fractional: 2-7/8 in
- Overall Length - Metric: 73.025 mm
- Single or Double End: Single End
- Variable Helix: No
- Variable Index: No
- Flute Type: Spiral
- Cutter Diameter - Fractional: 5/8 in
- Shank Type: Weldon Flat
- Diameter - Metric: 15.87 mm
- Flute Direction: Right Hand
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Non-Center Cutting Single End Stub Length | Series: REM710 | 5/8 in Cutter Dia | 0.03 in Corner Radius | 2-7/8 in Overall Length | 3/4 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 5/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REM710-0.625-D1-C030.3-Z4 | ISO Code: REM710.625D1C030.3Z4 | M42 HSS-Co 8 | Uncoated