Niagara Cutter 17014120 REM710 Non-Center Cutting Short Length Single End End Mill, 7/8 in Dia Cutter, 0.03 in Corner Radius, 1-7/8 in Length of Cut, 5 Flutes, 7/8 in Dia Shank, 4-1/8 in OAL, Uncoated
NIACUT 17014120
$113.23
/ EA
Out of Stock
- Mill Diameter: 7/8 in
- Mill Diameter - Decimal: 0.875 in
- Mill Diameter - Fractional: 7/8 in
- Mill Diameter - Metric: 22.225 mm
- Pitch: Coarse
- Length of Cut: 1-7/8 in
- Shank Diameter: 7/8 in
- Shank Diameter - Decimal: 0.875 in
- Shank Diameter - Fractional: 7/8 in
- Shank Diameter - Metric: 22.225 mm
- End Type: Square End
- Material: HSS-Co8
- Finish/Coating: Bright / Uncoated
- Overall Length: 4-1/8 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Chamfer Width: 0.03 in
- Chamfer Width - Decimal: 0.03 in
- Chipbreaker: No
- Corner Radius: 0.03 in
- Cutter Diameter: 7/8 in
- Cutter Diameter - Fractional: 7/8 in
- Cutting Direction: Right Hand
- Diameter: 7/8 in
- Diameter - Metric: 22.22 mm
- Length of Cut - Decimal: 1.875 in
- Length of Cut - Fractional: 1-7/8 in
- Length of Cut - Metric: 47.625 mm
- Number of Flutes: 5
- Overall Length - Decimal: 4.125 in
- Overall Length - Fractional: 4-1/8 in
- Overall Length - Metric: 104.775 mm
- Single or Double End: Single End
- Variable Helix: No
- Flute Type: Spiral
- Diameter - Fractional: 7/8 in
- Shank Type: Weldon Flat
- Flute Direction: Right Hand
- Variable Index: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Non-Center Cutting Short Length Single End | Series: REM710 | 7/8 in Cutter Dia | 0.03 in Corner Radius | 4-1/8 in Overall Length | 1-7/8 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 7/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REM710-0.875-D2-C030.3-Z5 | ISO Code: REM710.875D2C030.3Z5 | M42 HSS-Co 8 | Uncoated