Niagara Cutter 17014589 RHC752 Center Cutting Long Length Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 2 in Length of Cut, 3 Flutes, 1/2 in Dia Shank, 4 in OAL, Uncoated
NIACUT 17014589
$71.15
/ EA
Out of Stock
- Mill Diameter: 1/2 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Pitch: Coarse
- Length of Cut: 2 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- End Type: Square End
- Material: HSS-Co8
- Finish/Coating: Bright / Uncoated
- Overall Length: 4 in
- Centercutting: Center Cutting
- Helix Angle: 36 deg
- Chamfer Width: 0.03 in
- Chamfer Width - Decimal: 0.03 in
- Chipbreaker: No
- Corner Radius: 0.03 in
- Cutter Diameter: 1/2 in
- Cutting Direction: Right Hand
- Diameter: 1/2 in
- Diameter - Fractional: 1/2 in
- Flute Direction: Right Hand
- Length of Cut - Decimal: 2 in
- Length of Cut - Metric: 50.8 mm
- Number of Flutes: 3
- Overall Length - Decimal: 4 in
- Overall Length - Metric: 101.6 mm
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Variable Index: No
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/2 in
- Diameter - Metric: 12.7 mm
- Variable Helix: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Center Cutting Long Length Single End | Series: RHC752 | 1/2 in Cutter Dia | 0.03 in Corner Radius | 4 in Overall Length | 2 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 36 deg Helix Angle | Weldon Flat Shank | ANSI Code: RHC752-0.500-D4-C030.3-Z3 | ISO Code: RHC752.500D4C030.3Z3 | M42 HSS-Co 8 | Uncoated