Niagara Cutter 17015220 RHC752 Center Cutting Long Length Single End End Mill, 3/8 in Dia Cutter, 0.025 in Corner Radius, 1-1/2 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, TiCN Coated
NIACUT 17015220
$66.50
/ EA
Out of Stock
- Mill Diameter: 3/8 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Pitch: Coarse
- Length of Cut: 1-1/2 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- End Type: Square End
- Material: HSS-Co8
- Finish/Coating: TiCN
- Overall Length: 3-1/4 in
- Centercutting: Center Cutting
- Helix Angle: 36 deg
- Chamfer Width: 0.025 in
- Corner Radius: 0.025 in
- Cutter Diameter: 3/8 in
- Cutter Diameter - Fractional: 3/8 in
- Cutting Direction: Right Hand
- Diameter: 3/8 in
- Diameter - Fractional: 3/8 in
- Length of Cut - Decimal: 1.5 in
- Length of Cut - Fractional: 1-1/2 in
- Length of Cut - Metric: 38.1 mm
- Number of Flutes: 3
- Overall Length - Decimal: 3.25 in
- Overall Length - Fractional: 3-1/4 in
- Overall Length - Metric: 82.55 mm
- Single or Double End: Single End
- Flute Type: Spiral
- Shank Type: Weldon Flat
- Diameter - Metric: 9.525 mm
- Flute Direction: Right Hand
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Center Cutting Long Length Single End | Series: RHC752 | 3/8 in Cutter Dia | 0.025 in Corner Radius | 3-1/4 in Overall Length | 1-1/2 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 3/8 in Shank Dia | Right Hand Cutting | 36 deg Helix Angle | Weldon Flat Shank | ANSI Code: RHC752-0.375-D4-C025.3-Z3 | ISO Code: RHC752.375D4C025.3Z3 | M42 HSS-Co 8 | TiCN Coated