Niagara Cutter 17015249 RHC752 Center Cutting Extended Reach Single End End Mill, 1 in Dia Cutter, 0.04 in Corner Radius, 4 in Length of Cut, 3 Flutes, 1 in Dia Shank, 6-1/2 in OAL, TiCN Coated
NIACUT 17015249
$171.54
/ EA
Out of Stock
- Mill Diameter: 1 in
- Mill Diameter - Decimal: 1 in
- Mill Diameter - Metric: 25.4 mm
- Pitch: Coarse
- Length of Cut: 4 in
- Shank Diameter: 1 in
- Shank Diameter - Decimal: 1 in
- Shank Diameter - Metric: 25.4 mm
- End Type: Square End
- Material: HSS-Co8
- Finish/Coating: TiCN
- Overall Length: 6-1/2 in
- Centercutting: Center Cutting
- Helix Angle: 36 deg
- Chamfer Width: 0.04 in
- Chamfer Width - Decimal: 0.04 in
- Corner Radius: 0.04 in
- Cutter Diameter: 1 in
- Cutting Direction: Right Hand
- Diameter: 25.4 mm
- Diameter - Metric: 25.4 mm
- Length of Cut - Decimal: 4 in
- Length of Cut - Metric: 101.6 mm
- Number of Flutes: 3
- Overall Length - Decimal: 6.5 in
- Overall Length - Fractional: 6-1/2 in
- Overall Length - Metric: 165.1 mm
- Single or Double End: Single End
- Flute Type: Spiral
- Shank Type: Weldon Flat
- Flute Direction: Right Hand
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Center Cutting Extended Reach Single End | Series: RHC752 | 1 in Cutter Dia | 0.04 in Corner Radius | 6-1/2 in Overall Length | 4 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 1 in Shank Dia | Right Hand Cutting | 36 deg Helix Angle | Weldon Flat Shank | ANSI Code: RHC752-1.000-D5-C040.3-Z3 | ISO Code: RHC7521.000D5C040.3Z3 | M42 HSS-Co 8 | TiCN Coated