Niagara Cutter 17016188 REM445 Medium Length Non-Center Cutting Single End End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL, TiCN Coated
NIACUT 17016188
$47.66
/ EA
Out of Stock
- Mill Diameter: 1/4 in
- Mill Diameter - Decimal: 0.25 in
- Mill Diameter - Fractional: 1/4 in
- Mill Diameter - Metric: 6.35 mm
- Length of Cut: 5/8 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: HSS-Co8
- Finish/Coating: TiCN
- Overall Length: 2-7/16 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Chamfer Width: 0.02 in
- Chipbreaker: No
- Corner Radius: 0.02 in
- Cutter Diameter: 1/4 in
- Cutter Diameter - Fractional: 1/4 in
- Cutting Direction: Right Hand
- Length of Cut - Decimal: 0.625 in
- Length of Cut - Fractional: 5/8 in
- Length of Cut - Metric: 15.875 mm
- Overall Length - Decimal: 2.4375 in
- Overall Length - Fractional: 2-7/16 in
- Overall Length - Metric: 61.9125 mm
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Variable Helix: No
- Flute Type: Spiral
- Number of Flutes: 4
- Flute Direction: Right Hand
- Variable Index: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Medium Length Non-Center Cutting Single End | Series: REM445 | 1/4 in Cutter Dia | 0.02 in Corner Radius | 2-7/16 in Overall Length | 5/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 3/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REM445-0.250-F3-C020.3-Z4 | ISO Code: REM445.250F3C020.3Z4 | M42 HSS-Co 8 | TiCN Coated