Niagara Cutter 17016493 SPB540 Ball End Center Cutting Short Length Single End End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 4 Flutes, 7/8 in Dia Shank, 4-1/8 in OAL, TiCN Coated
NIACUT 17016493
$152.52
/ EA
Out of Stock
- Mill Diameter: 7/8 in
- Number of Flutes: 4
- Length of Cut: 1-7/8 in
- Material: M42 8% Cobalt
- Overall Length: 4-1/8 in
- Shank Diameter: 7/8 in
- Shank Diameter - Decimal: 0.875 in
- Shank Diameter - Fractional: 7/8 in
- Shank Diameter - Metric: 22.22 mm
- Finish/Coating: TiCN-Coated
- Helix Angle: 30 deg
- Cutter Diameter: 7/8 in
- Cutter Diameter - Decimal: 0.875 in
- Cutter Diameter - Fractional: 7/8 in
- Cutting Direction: Right Hand
- Finish: TiCN Coated
- Length of Cut - Fractional: 1-7/8 in
- Length Type: Short Length
- Overall Length - Fractional: 4-1/8 in
- Shank Type: Weldon Flat
- Type: Center Cutting
- Series: SPB540
- Flute Type: Spiral
- Cutter Diameter - Metric: 22.22 mm
- Cobalt is harder than high speed steel and provides better wear resistance, it is commonly used on high tensile alloys
- Titanium carbonitride (TiCN) is harder and more wear resistant than TiN and is commonly used on stainless steels, cast iron and aluminum alloys
- 90 deg cutting edge
- 2.031 in L minimum clamping
- 30 deg axial rake
- 10 deg radial rake
- Ball nose end mills create contoured surfaces
- Center cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- D - Cylindrical tool shape
For profiling and contouring in all materials
Niagara Cutter End Mill | Ball End Center Cutting Short Length Single End | Series: SPB540 | 7/8 in Cutter Dia | 4-1/8 in Overall Length | 7/8 in | 1-7/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 7/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: SPB540-0.875-D2-B.3-Z4 | ISO Code: SPB540.875D2B.3Z4 | M42 8% Cobalt | TiCN Coated