Niagara Cutter 17016663 RTM713 Center Cutting Single End Square End Stub Length End Mill, 3/4 in Dia Cutter, 3/4 in Length of Cut, 3 Flutes, 3/4 in Dia Shank, 3 in OAL, TiCN Coated
NIACUT 17016663
$82.34
/ EA
- Mill Diameter: 3/4 in
- Number of Flutes: 3
- Length of Cut: 3/4 in
- Material: M42 8% Cobalt
- Finish/Coating: TiCN Coated
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- Overall Length: 3 in
- Cutting Direction: Right Hand
- Helix Angle: 36 deg
- Chamfer Angle: 45 deg
- Cutter Diameter: 3/4 in
- Cutter Diameter - Fractional: 3/4 in
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Diameter - Fractional: 3/4 in
- Flute Type: Coarse Pitch
- Length of Cut - Fractional: 3/4 in
- Overall Length - Decimal: 3 in
- Pitch: Coarse
- Series: RTM713
- Shank Type: Weldon Flat
- Type: Center Cutting
- Diameter - Metric: 19.05 mm
- Cobalt is harder than high speed steel and provides better wear resistance, it is commonly used on high tensile alloys
- Titanium carbonitride (TiCN) is harder and more wear resistant than TiN and is commonly used on stainless steels, cast iron and aluminum alloys
- 90 deg cutting edge
- 0.025 in W corner chamfer
- 2.031 in L minimum clamping
- 36 deg axial rake
- 13 deg radial rake
- They are used at reduced speeds for general applications on non-ferrous metals
- 45 deg corner chamfer
- D - Cylindrical tool shape
General Purpose Applications
Niagara Cutter End Mill | Center Cutting Single End Square End Stub Length | Series: RTM713 | 3/4 in Cutter Dia | 3 in Overall Length | 3/4 in | 3/4 in Maximum Depth of Cut | 3 Flutes | Coarse Pitch Flute | 3/4 in Shank Dia | Right Hand Cutting | 36 deg Helix Angle | Weldon Flat Shank | ANSI Code: RTM713-0.750-D1-C025.3-Z3 | ISO Code: RTM713.750D1C025.3Z3 | M42 8% Cobalt | TiCN Coated