OSG 20100100 1/8 in Mill Dia, 3/8 in LOC, 1-1/2 in OAL, 2 Flutes, Carbide, Bright, Ball End Mill
- Number of Flutes: 2
- Length of Cut: 3/8 in
- Material: Carbide
- Overall Length: 1.5 in
- Shank Diameter: 1/8 in
- Shank Diameter - Decimal: 0.125 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.175 mm
- Helix Angle: 30 deg
- Cutter Diameter: 1/8 in
- Cutting Direction: Right Hand
- Diameter: 1/8 in
- End Type: Ball Nose
- Length of Cut - Fractional: 3/8 in
- Overall Length - Fractional: 1-1/2 in
- Series: 2010
- Shank Type: Shrink Fit
- Length Type: Regular Length
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/8 in
- Diameter - Fractional: 1/8 in
- Diameter - Decimal: 0.125 in
- Diameter - Metric: 3.175 mm
- Finish: Bright
The Exocarb® Aero Blizzard® Series Is Part Of The Osg Premium Line Of Carbide High Performance End Mills Specifically Designed For Either Aluminum Or Copper Alloys. Special End Cut Gashing And Offset Teeth Permit Large Depths Of Cut And Maximum Feed Per Tooth. Made With Polished Flutes To Enhance Tool Life And Reduce Bue, This End Mill Yields 45-50% Higher Metal Removal Rates In Roughing Applications, And Superior Finishing Capability.
- Refined Geometry
- Ultra Smooth Flutes
- Dlc Available On Request
- Exo? Is A Multi-Layered Tialn Coating Usedon Carbide Tools For High Speed Applications. It Has An Ultra-Smooth Finish And Is Ideal For Applications Where Excessive Heat Is A Concern. Exo? Is A Proprietary Coating Exclusive To Osg Tap And Die, Inc
- Uncoated Tools Do Not Feature Supportive Treatments On The Cutting Edge
Application:Aluminum And Copper Alloys.Any Application Where Productivity And The Lowest Cost-Per-Unit Is The Goal.When Spindle Speed Is Limited (< 10,000 Rpm).Aerospace, Job Shops.Roughing, Finishing And Contouring
Osg 20100100 Mill Diameter 1/8 In | Number Of Flutes 2 | Length Of Cut 3/8 In | Solid Carbide | 1-1/2 In | Ball End Mill