OSG 20100200 3/16 in Mill Dia, 9/16 in LOC, 2 in OAL, 2 Flutes, Carbide, Bright, Ball End Mill
- Mill Diameter: 3/16 in
- Number of Flutes: 2
- Length of Cut: 9/16 in
- Material: Solid Carbide, Carbide
- Overall Length: 2 in
- Shank Diameter: 3/16 in
- Shank Diameter - Decimal: 0.1875 in, 1.0000 in
- Shank Diameter - Fractional: 1/2 in, 3/16 in
- Shank Diameter - Metric: 4.762 mm, 12.7 mm
- Finish/Coating: Bright, Uncoated
- Single or Double End: Single End
- Helix Angle: 30 deg
- Body Length: 3.3330 in
- Centercutting: Centercutting
- Coolant Through: No
- Cutter Diameter: 3/16 in
- Cutting Direction: Right Hand
- Diameter: 3/16 in
- Diameter - Metric: 17.46 mm, 4.762 mm
- Extended Reach: No
- Flute Length: 2.7420 in
- Flute Type: Spiral
- Insert Compatibility: WDXT 052504
- Length of Cut - Fractional: 9/16 in
- Length Type: Regular Length
- Series: 2010, HG-4 TiCN
- Shank Length: 2.5000 in
- Shank Type: Cylindrical, Shrink Fit
- Cutter Diameter - Fractional: 3/16 in
- Diameter - Fractional: 11/16 in, 3/16 in
- Diameter - Decimal: 0.6875 in, 0.1875 in
- End Type: Ball Nose
- Type: Finishing
- Finish: Bright
- Flute Direction: Right Hand
The Exocarb® Aero Blizzard® Series Is Part Of The Osg Premium Line Of Carbide High Performance End Mills Specifically Designed For Either Aluminum Or Copper Alloys. Special End Cut Gashing And Offset Teeth Permit Large Depths Of Cut And Maximum Feed Per Tooth. Made With Polished Flutes To Enhance Tool Life And Reduce Bue, This End Mill Yields 45-50% Higher Metal Removal Rates In Roughing Applications, And Superior Finishing Capability.
- Refined Geometry
- Ultra Smooth Flutes
- Dlc Available On Request
- Uncoated Tools Do Not Feature Supportive Treatments On The Cutting Edge
Application:Aluminum And Copper Alloys. Any Application Where Productivity And The Lowest Cost-Per-Unit Is The Goal. When Spindle Speed Is Limited (< 10,000 Rpm). Aerospace, Job Shops. Roughing, Finishing And Contouring.They Are Are Used At Reduced Speeds For General Applications On Nonferrous Metals.
Osg 20100200 Mill Diameter 3/16 In | Number Of Flutes 2 | Length Of Cut 9/16 In | Solid Carbide | 2.0000 In | Ball End Mill