OSG 20100600 7/16 in Mill Dia, 1 in LOC, 2-3/4 in OAL, 2 Flutes, Carbide, Bright, Ball End Mill
- Number of Flutes: 2
- Length of Cut: 1 in
- Material: Carbide
- Overall Length: 2.75 in
- Shank Diameter: 7/16 in
- Shank Diameter - Decimal: 0.4375 in
- Shank Diameter - Fractional: 7/16 in
- Shank Diameter - Metric: 11.11 mm
- Helix Angle: 30 deg
- Cutter Diameter: 7/16 in
- Cutter Diameter - Fractional: 7/16 in
- Cutting Direction: Right Hand
- Diameter: 7/16 in
- Overall Length - Fractional: 2-3/4 in
- Series: 2010
- Shank Type: Shrink Fit
- Length Type: Regular Length
- Flute Type: Spiral
- Diameter - Fractional: 7/16 in
- End Type: Ball Nose
- Diameter - Decimal: 0.4375 in
- Diameter - Metric: 11.11 mm
- Finish: Bright
The Exocarb® Aero Blizzard® Series Is Part Of The Osg Premium Line Of Carbide High Performance End Mills Specifically Designed For Either Aluminum Or Copper Alloys. Special End Cut Gashing And Offset Teeth Permit Large Depths Of Cut And Maximum Feed Per Tooth. Made With Polished Flutes To Enhance Tool Life And Reduce Bue, This End Mill Yields 45-50% Higher Metal Removal Rates In Roughing Applications, And Superior Finishing Capability.
- Refined Geometry
- Larger Depth Of Cut And Maximum Feed Per Tooth
- Ultra Smooth Flutes
- Enhances Tool Life By Reducing Bue
- Dlc Available On Request
- Ideal For Rough And Finish Contouring
Application:Aluminum And Copper Alloys.Any Application Where Productivity And The Lowest Cost-Per-Unit Is The Goal.When Spindle Speed Is Limited (< 10,000 Rpm).Aerospace, Job Shops.Roughing, Finishing And Contouring
Osg 20100600 Mill Diameter 7/16 In | Number Of Flutes 2 | Length Of Cut 1 In | Solid Carbide | 2-3/4 In | Ball End Mill