OSG 20101000 1 in Mill Dia, 2 in LOC, 5 in OAL, 2 Flutes, Carbide, Bright, Ball End Mill
- Number of Flutes: 2
- Length of Cut: 2 in
- Material: Carbide
- Overall Length: 5 mm
- Shank Diameter: 1 in
- Shank Diameter - Decimal: 1 in
- Shank Diameter - Metric: 25.4 mm
- Helix Angle: 30 deg
- Cutter Diameter: 1 in
- Cutting Direction: Right Hand
- Diameter: 1 in
- Diameter - Decimal: 1 in
- Diameter - Metric: 25.4 mm
- End Type: Ball Nose
- Length Type: Regular Length
- Overall Length - Metric: 5 mm
- Series: 2010
- Shank Type: Shrink Fit
- Flute Type: Spiral
- Finish: Bright
The Exocarb® Aero Blizzard® Series Is Part Of The Osg Premium Line Of Carbide High Performance End Mills Specifically Designed For Either Aluminum Or Copper Alloys. Special End Cut Gashing And Offset Teeth Permit Large Depths Of Cut And Maximum Feed Per Tooth. Made With Polished Flutes To Enhance Tool Life And Reduce Bue, This End Mill Yields 45-50% Higher Metal Removal Rates In Roughing Applications, And Superior Finishing Capability.
- Refined Geometry
- Ultra Smooth Flutes
- Dlc Available On Request
- Uncoated Tools Do Not Feature Supportive Treatments On The Cutting Edge
Application:Aluminum And Copper Alloys. Any Application Where Productivity And The Lowest Cost-Per-Unit Is The Goal. When Spindle Speed Is Limited (< 10,000 Rpm). Aerospace, Job Shops. Roughing, Finishing And Contouring.They Are Are Used At Reduced Speeds For General Applications On Nonferrous Metals.
Osg 20101000 Mill Diameter 1 In | Number Of Flutes 2 | Length Of Cut 2 In | Solid Carbide | 5.0000 In | Ball End Mill