OSG 20150211 1/4 in, 3/4 in, 2-1/2 in, 4 Flutes, Carbide, TiAlN Coated, Roughing End Mills
OSG 20150211
$117.86
/ EA
Out of Stock
- Mill Diameter: 1/4 in
- Mill Diameter - Decimal: 0.25 in
- Mill Diameter - Fractional: 1/4 in
- Mill Diameter - Metric: 6.35 mm
- Pitch: Coarse
- Length of Cut: 3/4 in
- Shank Diameter: 1/4 in
- Shank Diameter - Decimal: 0.25 in
- Shank Diameter - Fractional: 1/4 in
- Shank Diameter - Metric: 6.35 mm
- End Type: Corner Radius
- Material: Carbide
- Finish/Coating: TiAlN
- Overall Length: 2-1/2 in
- Centercutting: Center Cutting
- Helix Angle: 40 deg
- Cutter Diameter: 1/4 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Finish: TiAlN Coated
- Length of Cut - Decimal: 0.75 in
- Length of Cut - Fractional: 3/4 in
- Length of Cut - Metric: 19.05 mm
- Number of Flutes: 4
- Overall Length - Decimal: 2.5 in
- Overall Length - Fractional: 2-1/2 in
- Overall Length - Metric: 63.5 mm
- Series: 2015
- Shank Type: Shrink Fit
- Cutter Diameter - Fractional: 1/4 in
Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant. Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN.
Application:Used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.Particularly advantageous for higher speed operations in a variety of steel machining applications.
OSG 20150211 Coarse Pitch | 3/4 in LOC | 4 | Carbide | Roughing End Mill