OSG 3052035 2 mm Dia, 1.6 mm LOC, 70 mm OAL, 2 Flutes, Micrograin Carbide, WXS® Coated, Ball End Mill
OSG 3052035
$120.07
/ EA
Out of Stock
- Mill Diameter: 2 mm
- Mill Diameter - Decimal: 0.0787 in
- Mill Diameter - Metric: 2 mm
- Number of Flutes: 2
- Length of Cut: 1.6 mm
- Material: Carbide
- Overall Length: 70 mm
- Shank Diameter: 4 mm
- Shank Diameter - Decimal: 0.1575 in
- Shank Diameter - Metric: 4 mm
- Finish/Coating: Multi-SiC layer
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 2 mm
- Cutter Diameter - Metric: 2 mm
- Cutting Direction: Right Hand
- Diameter: 0.0787 in
- Diameter - Decimal: 0.0787 in
- Extended Reach: Yes
- Finish: WXS® Coated
- Flute Type: Spiral
- Length of Cut - Decimal: 0.063 in
- Length of Cut - Metric: 1.6 mm
- Neck Diameter: 0.0768 in
- Neck Diameter - Decimal: 0.0768 in
- Neck Diameter - Metric: 1.95 mm
- Neck Length: 35 mm
- Overall Length - Decimal: 2.7559 in
- Overall Length - Metric: 70 mm
- Reach Length: 1.378 in
- Series: 4590
- Shank Length - Metric: 30.6 mm
- Shank Type: Shrink Fit
- Diameter - Metric: 1.998 mm
- End Type: Ball Nose
- Flute Direction: Right Hand
Exocarb®-Wxs End Mills Are The New Industry Standard For Hard Milling. Everything About Wxs Is Designed For Rigidity And Performance In Hardened Steel 50 Hrc And Greater. Substrates, Geometry, And Proprietary Wxs Coating Are All Specifically Tailored For Hardened Steels Like D2, A2, S7, H13 And Cpm.
- Ultra-Fine Micrograin Carbide
- High Precision Geometry - All Corner Radius & Ball Mills Have +/-5Um Radius Tolerance
- High Strength Core Diameter
- Wxs Coating - +1300 Celsius Oxidation Temp. & +3500Hv In Hardness
Application:Ideally Suited For Hardened Steel > 50 Hrc. Also Works In: Cast Iron, Carbon Steel, Alloy Steel, Die Steel, Hardened Steel 35-50 Hrc. Use In Combination With High Speed Machining Techniques To Optimize Performance.
Osg 3052035 Mill Diameter 0.0787 In | Number Of Flutes 2 | Length Of Cut 0.0630 In | Carbide | 70 Mm | Ball End Mill