OSG 3170421 5 mm Dia, 5 mm LOC, 130 mm OAL, 2 Flutes, Micrograin Carbide, WXL® Coated, Ball End Mill
- Mill Diameter: 5 mm
- Mill Diameter - Decimal: 0.1969 in
- Mill Diameter - Metric: 5 mm
- Number of Flutes: 2
- Length of Cut: 5 mm
- Material: Carbide
- Overall Length: 130 mm
- Shank Diameter: 8 mm
- Shank Diameter - Decimal: 0.315 in
- Shank Diameter - Metric: 8 mm
- Finish/Coating: WXL®
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 5 mm
- Cutter Diameter - Metric: 5 mm
- Cutting Direction: Right Hand
- Diameter: 0.19685 in
- End Type: Ball Nose
- Extended Reach: Yes
- Finish: WXL® Coated
- Length of Cut - Decimal: 0.1969 in
- Length of Cut - Metric: 5 mm
- Neck Diameter: 0.19488 in
- Neck Diameter - Decimal: 0.19488 in
- Neck Length: 50.10 mm
- Overall Length - Metric: 130 mm
- Reach Length: 1.9724 in
- Series: 3712
- Shank Length - Metric: 79.9 mm
- Shank Type: Shrink Fit
- Taper Angle: 2 deg
- Type: Center Cutting
- Flute Type: Spiral
- Diameter - Metric: 5 mm
- Diameter - Decimal: 0.19685 in
- Neck Diameter - Metric: 4.95 mm
EXOCARB® WXL end mills are the new industry standard for hard milling. Everything about WXL is designed for rigidity and performance in wide variety of materials and a wide variety of milling applications. Substrates, geometry, and proprietary WXL coating are all specifically tailored for nonferrous materials, mild steels, and steels up to 50HRC.
- Ultra-fine micrograin carbide
- The hardest ost wear resistant carbide possible for incredible wear resistance
- High Precision geometry
- High accuracy all but eliminates need for benching and rework for mold makers
- High strength core diameter
- Tools utilize thicker core diameters for the ultimate in strength and rigidity
- WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness
- Higher coating oxidation temp & hardness dramatically improve wear resistance
Application: It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.It is ideal for steels and hardened steels and for non-ferrous materials. WXL? is a proprietary coating exclusive to OSG Tap and Die, Inc.
OSG 3170421 Mill Diameter 0.1969 in | Number of Flutes 2 | Length of Cut 0.1969 in | Solid Carbide | 130 mm | Ball End Mill