OSG 3195212 2 mm Dia, 1.5 mm LOC, 50 mm OAL, 3 Flutes, Carbide, WXS® Coated, Ball End Mill
OSG 3195212
$109.95
/ EA
- Mill Diameter: 2 mm
- Mill Diameter - Decimal: 0.0787 in
- Mill Diameter - Metric: 2 mm
- Number of Flutes: 2
- Length of Cut: 1.5 mm
- Material: Carbide
- Overall Length: 50 mm
- Shank Diameter: 4 mm
- Shank Diameter - Decimal: 0.1575 in
- Shank Diameter - Metric: 4 mm
- Finish/Coating: WXL®
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 2 mm
- Cutter Diameter - Metric: 2 mm
- Cutting Direction: Right Hand
- Diameter: 0.0787 in
- Diameter - Decimal: 0.0787 in
- End Type: Ball Nose
- Extended Reach: Yes
- Finish: WXS® Coated
- Length of Cut - Decimal: 0.0591 in
- Length of Cut - Metric: 1.5 mm
- Neck Diameter: 0.0768 in
- Neck Diameter - Decimal: 0.0768 in
- Neck Diameter - Metric: 1.95 mm
- Overall Length - Metric: 50 mm
- Reach Length: 0.4724 in
- Series: 9590
- Shank Length - Metric: 32.9 mm
- Shank Type: Shrink Fit
- Type: Center Cutting
- Flute Type: Spiral
- Diameter - Metric: 1.998 mm
- Neck Length: 12 mm
The Exopro® Phx End Mill Series Is Designed Exclusively For Mold Makers, To Help Them Realize Greater Cost Savings And Shorter Delivery Times With Their Existing Equipment. New Spiral Gash Geometry Is Combined With Radial Chip Thinning Principles To Create End Mills Capable Of Taking Deeper Depths Of Cut With Length To Diameter Ratio'S Previously Thought Impractical.
- Spiral Gash Geometry Increases Edge Strength And Reduces Chip Thickness
- Osg'S Wxs® Nano Coating Wxs® Boasts The Absolute Highest Hardness And Heat Resistance Of Any Osg Coating
- Available In A Wide Variety Of Shapes And Lengths To Reach Any Mold Cavity Or Core.
Osg 3195212 Mill Diameter 0.0787 In | Number Of Flutes 3 | Length Of Cut 1.50 Mm | Solid Carbide | 50.00 Mm | Ball End Mill