OSG

OSG 36040911 1/4 in Milling Dia, 3/4 in LOC, 2-1/2 in OAL, 4 Flutes, Micrograin Carbide, WXL® Coated, Square End Mills

OSG 36040911
$85.11 / EA
Product Image
  • Centercutting: Center Cutting
  • Mill Diameter: 1/4 in
  • Mill Diameter - Decimal: 0.25 in
  • Mill Diameter - Fractional: 1/4 in
  • Number of Flutes: 4
  • Length of Cut: 3/4 in
  • Material: Micrograin Carbide
  • Finish/Coating: WXL
  • Shank Diameter: 1/4 in
  • Shank Diameter - Decimal: 0.25 in
  • Shank Diameter - Fractional: 1/4 in
  • Shank Diameter - Metric: 6.35 mm
  • Single or Double End: Single End
  • Overall Length: 2-1/2 in
  • Flute Direction: Right Hand
  • Cutting Direction: Right Hand
  • Helix Angle: 30 deg
  • Center Cutting: Yes
  • Chipbreaker: No
  • Cutter Diameter: 1/4 in
  • Diameter: 0.197 in
  • Diameter - Decimal: 0.197 in
  • Diameter - Fractional: 1/4 in
  • Diameter - Metric: 6.35 mm
  • Extended Reach: No
  • Finish: WXL® Coated
  • Length of Cut - Fractional: 3/4 in
  • Length Type: Regular Length
  • Material Grade: Micrograin
  • Mill Diameter Tolerance: +0 / -0.0008 in
  • Overall Length - Fractional: 2-1/2 in
  • Series: 3604
  • Series/List: 3604
  • Shank Type: Shrink Fit
  • Variable Helix: No
  • Flute Type: Spiral
  • Cutter Diameter - Fractional: 1/4 in
  • Variable Index: No

EXOCARB® WXL end mills are the new industry standard for hard milling. Everything about WXL is designed for rigidity and performance in wide variety of materials and a wide variety of milling applications. Substrates, geometry, and proprietary WXL coating are all specifically tailored for nonferrous materials, mild steels, and steels up to 50HRC.

  • Ultra-fine micrograin carbide
  • The hardest most wear resistant carbide possible for incredible wear resistance
  • High Precision geometry
  • High accuracy all but eliminates need for benching and rework for mold makers
  • High strength core diameter
  • Tools utilize thicker core diameters for the ultimate in strength and rigidity
  • WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness
  • Higher coating oxidation temp & hardness dramatically improve wear resistance.

Standard/Approvals:Micrograin

Application:Ideally suited for Hardened steel < 50 HRC.Also works in: Cast Iron, Carbon Steel, Alloy Steel, Alloy Steel, Die Steel, Copper Alloys and Aluminum Alloys.Use in combination with High Speed Machining Techniques to optimize performance.

OSG 36040911 Mill Diameter 0.2500 in | Number of Flutes 4 | Length of Cut 3/4 in | Carbide | WXL | Square End Mill

QTY
Add to List