OSG 412-0938 3/32 in Milling Dia, 3/16 in LOC, 1-1/2 in OAL, 2 Flutes, Carbide, Bright, Square End Mills
- Mill Diameter: 3/32 in
- Number of Flutes: 2
- Length of Cut: 3/16 in
- Material: Carbide
- Finish/Coating: Bright
- Shank Diameter: 1/8 in
- Shank Diameter - Decimal: 0.1398 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.55 mm
- Overall Length: 1.5 in
- Cutting Direction: Right Hand
- Helix Angle: 30 deg
- Cutter Diameter: 3/32 in
- Cutter Diameter - Fractional: 3/32 in
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Diameter - Fractional: 3/32 in
- Flute Type: Spiral
- Length of Cut - Fractional: 3/16 in
- Length Type: Stub Length
- Overall Length - Decimal: 1.5 in
- Overall Length - Fractional: 1-1/2 in
- Series: 412
- Shank Type: Straight
- Diameter - Metric: 2.381 mm
- Finish: Bright
End mills are used to cut and contour molds for plastic parts, which include electric home appliances, die casting dies for automotive parts and stamping molds. To meet today's demanding requirements (smaller size, lower weight and reduced cost), OSG has developed many carbide end mills that are excellent in both processing accuracy and durability.
- Square end mills have sharp corners and are utilized when square right angles are needed
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General Milling Applications
OSG Square End Mill | Center Cutting Single End Stub Length Standard | Series: 412 | 3/32 in Cutter Dia | 1-1/2 in Overall Length | 3/16 in Maximum Depth of Cut | 2 Flutes | Spiral Flute | 1/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Straight Shank | Carbide | Bright