OSG 4701400 3/4 in, 2-1/4 in, 4-1/2 in, 4 Flutes, HSS-CO, Bright, Roughing End Mills
OSG 4701400
$132.96
/ EA
Out of Stock
- Mill Diameter: 3/4 in
- Mill Diameter - Decimal: 0.75 in
- Mill Diameter - Fractional: 3/4 in
- Mill Diameter - Metric: 19.05 mm
- Pitch: Coarse
- Length of Cut: 2-1/4 in
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- End Type: Square
- Finish/Coating: Bright / Uncoated
- Overall Length: 4-1/2 in
- Centercutting: Center Cutting
- Helix Angle: 25 deg
- Cutter Diameter: 3/4 in
- Cutter Diameter - Fractional: 3/4 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Flute Type: Muliple Flute
- Length of Cut - Decimal: 2.25 in
- Length of Cut - Fractional: 2-1/4 in
- Length of Cut - Metric: 57.15 mm
- Number of Flutes: 4
- Overall Length - Decimal: 4.5 in
- Overall Length - Fractional: 4-1/2 in
- Overall Length - Metric: 114.3 mm
- Series: 470
- Shank Type: Weldon Flat
- Finish: Bright
HSS-Co ROUGHING Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials
- Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Application:Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
OSG 4701400 Coarse Pitch | 2-1/4 in LOC | 4 | HSS-CO | Roughing End Mill