OSG 4909800 3/8 in, 1-1/2 in, 3-1/4 in, 4 Flutes, HSS-CO, Bright, Roughing End Mills
OSG 4909800
$83.64
/ EA
Out of Stock
- Mill Diameter: 3/8 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Pitch: Coarse
- Length of Cut: 1-1/2 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- End Type: Square
- Finish/Coating: Bright / Uncoated
- Overall Length: 3-1/4 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Cutter Diameter: 3/8 in
- Cutter Diameter - Fractional: 3/8 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Flute Type: Muliple Flute
- Length of Cut - Decimal: 1.5 in
- Length of Cut - Fractional: 1-1/2 in
- Length of Cut - Metric: 38.1 mm
- Number of Flutes: 4
- Overall Length - Decimal: 3.25 in
- Overall Length - Fractional: 3-1/4 in
- Overall Length - Metric: 82.55 mm
- Series: 490
- Shank Type: Weldon Flat
- Finish: Bright
HSS-Co ROUGHING Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials
- Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Application:Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
OSG 4909800 Coarse Pitch | 1-1/2 in LOC | 4 | HSS-CO | Roughing End Mill