OSG 5401900 23/32 in Milling Dia, 1-5/8 in LOC, 3-5/8 in OAL, 4 Flutes, HSS-Co, Bright, Square End Mills
- Mill Diameter: 23/32 in
- Number of Flutes: 4
- Length of Cut: 1-5/8 in
- Finish/Coating: Bright
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Overall Length: 3-5/8 in
- Cutting Direction: Right Hand
- Helix Angle: 30 deg
- Cutter Diameter: 23/32 in
- Cutter Diameter - Fractional: 23/32 in
- Diameter: 23/32 in
- Diameter - Decimal: 0.71875 in
- Diameter - Fractional: 23/32 in
- Diameter - Metric: 18.25 mm
- Length of Cut - Fractional: 1-5/8 in
- Overall Length - Decimal: 3.625 in
- Overall Length - Fractional: 3-5/8 in
- Series: 540
- Shank Type: Weldon Flat
- Flute Type: Spiral
- Finish: Bright
End mills are used to cut and contour molds for plastic parts, which include electric home appliances, die casting dies for automotive parts and stamping molds. To meet today's demanding requirements (smaller size, lower weight and reduced cost), OSG has developed many carbide end mills that are excellent in both processing accuracy and durability.
- Square end mills have sharp corners and are utilized when square right angles are needed
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General Milling Applications
OSG Square End Mill | High Performance Non-Center Cutting Regular Length Single End | Series: 540 | 23/32 in Cutter Dia | 3-5/8 in Overall Length | 1-5/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weld-On Flat Shank | HSS-Co | Bright