OSG 5667800 5/32 in Milling Dia, 15/64 in LOC, 2 in OAL, 4 Flutes, HSS-CO, Bright, Square End Mills
OSG 5667800
$39.08
/ EA
- Centercutting: Center Cutting, No Center Cutting
- Mill Diameter: 3.97 mm, 5/32 in
- Mill Diameter - Decimal: 0.1563 in
- Mill Diameter - Fractional: 5/32 in
- Mill Diameter - Metric: 3.97 mm
- Number of Flutes: 4
- Length of Cut: 0.2344 in, 15/64 in
- Material: HSS-CO
- Finish/Coating: Bright, Uncoated
- Shank Diameter: 0.1875 in, 3/16 in
- Shank Diameter - Decimal: 0.1875 in
- Shank Diameter - Fractional: 3/16 in
- Shank Diameter - Metric: 4.762 mm, 4.7625 mm
- Single or Double End: Double End
- Overall Length: 2 in
- Flute Direction: Right Hand
- Cutting Direction: Right Hand
- Helix Angle: 30 deg
- Center Cutting: No
- Chipbreaker: No
- Coolant Through: No
- Corner Radius: 0.4 in
- Cutter Diameter: 5/32 in
- Cutter Diameter - Fractional: 5/32 in
- Diameter: 0.03149 in, 5/32 in
- Diameter - Decimal: 0.03149 in, 0.156 in
- Diameter - Metric: 0.8 mm, 3.968 mm
- Finish: Blue, Bright
- Flute Type: Spiral
- Grade: X-5070
- Length of Cut - Decimal: 0.2344 in
- Length of Cut - Fractional: 15/64 in
- Length of Cut - Metric: 5.9538 mm
- Length Type: Regular Length, Short Length
- Material Grade: Fine Grain
- Mill Diameter Tolerance: +0 / -0.0011 in
- Overall Length - Decimal: 2 in
- Series: 566, G8A28
- Series/List: 566
- Shank Type: Weldon Flat
- Type: High Performance
- Diameter - Fractional: 5/32 in
- End Type: Ball Nose
HSS-Co END MILL High Performance Cobalt HSS End Mills for General Milling Applications
- Spiral flutes are constructed of a high flute angle to remove chips more easily
- Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
OSG 5667800 Mill Diameter 5/32 in | Number of Flutes 4 | Length of Cut 15/64 in | HSS-CO | Bright | Square End Mill