OSG 6900105 1/2 in, 1-1/4 in, 3-1/4 in, 4 Flutes, HSS-E, T in, Coated, Roughing End Mills
OSG 6900105
$145.84
/ EA
Out of Stock
- Mill Diameter: 1/2 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Pitch: Coarse
- Length of Cut: 1-1/4 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- End Type: Square
- Material: HSS-E
- Finish/Coating: TiN
- Overall Length: 3-1/4 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Cutter Diameter: 1/2 in
- Cutter Diameter - Fractional: 1/2 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Finish: TiN Coated
- Flute Type: Muliple Flute
- Length of Cut - Decimal: 1.25 in
- Length of Cut - Fractional: 1-1/4 in
- Length of Cut - Metric: 31.75 mm
- Number of Flutes: 4
- Overall Length - Decimal: 3.25 in
- Overall Length - Fractional: 3-1/4 in
- Overall Length - Metric: 82.55 mm
- Series: 690
- Shank Type: Weldon Flat
EXOTIN® ROUGHING Premium Powdered Metal Roughing End Mills for Difficult to Machine Materials.
- Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
OSG 6900105 1/2 in Diam | Coarse Pitch | 1-1/4 in LOC | 4 | Cobalt | Roughing End Mill