OSG 6900305 1/2 in, 2 in, 4 in, 4 Flutes, HSS-E, T in, Coated, Roughing End Mills
OSG 6900305
$182.93
/ EA
Out of Stock
- Mill Diameter: 1/2 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Pitch: Coarse
- Length of Cut: 2 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- End Type: Square
- Material: HSS-E
- Finish/Coating: TiN
- Overall Length: 4 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Cutter Diameter: 1/2 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Finish: TiN Coated
- Flute Type: Muliple Flute
- Length of Cut - Decimal: 2 in
- Length of Cut - Metric: 50.8 mm
- Overall Length - Decimal: 4 in
- Overall Length - Metric: 101.6 mm
- Series: 690
- Shank Type: Weldon Flat
- Cutter Diameter - Fractional: 1/2 in
- Number of Flutes: 4
EXOTIN® ROUGHING Premium Powdered Metal Roughing End Mills for Difficult to Machine Materials.
- Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
OSG 6900305 1/2 in Diam | Coarse Pitch | 2 in LOC | 4 | Cobalt | Roughing End Mill