OSG

OSG 70300216 3/64 in Mill Dia, 3/16 in LOC, 1-3/4 in OAL, 4 Flutes, Carbide, Diamond Coated, Ball End Mill

OSG 70300216
$167.52 / EA
  • Mill Diameter: 0.0469 in
  • Mill Diameter - Decimal: 0.0469 in
  • Mill Diameter - Fractional: 3/64 in
  • Number of Flutes: 4
  • Length of Cut: 0.1875 in
  • Material: Carbide
  • Overall Length: 1.75 in
  • Shank Diameter: 0.125 in
  • Shank Diameter - Decimal: 0.125 in
  • Shank Diameter - Fractional: 1/8 in
  • Shank Diameter - Metric: 3.175 mm
  • Finish/Coating: Diamond
  • Single or Double End: Single End
  • Helix Angle: 30 deg
  • Centercutting: Center Cutting
  • Coolant Through: No
  • Cutter Diameter: 3/64 in
  • Cutter Diameter - Fractional: 3/64 in
  • Cutting Direction: Right Hand
  • Diameter: 3/64 in
  • Diameter - Decimal: 0.04687 in
  • End Type: Ball Nose
  • Finish: Diamond Coated
  • Length of Cut - Decimal: 0.1875 in
  • Length of Cut - Fractional: 3/16 in
  • Neck Diameter: 0.04 in
  • Neck Diameter - Decimal: 0.04 in
  • Neck Diameter - Metric: 1.02 mm
  • Neck Length: 0.5 in
  • Overall Length - Decimal: 1.75 in
  • Overall Length - Fractional: 1-3/4 in
  • Series: 7030
  • Shank Type: Shrink Fit
  • Flute Type: Spiral
  • Diameter - Fractional: 3/64 in
  • Diameter - Metric: 1.19 mm
  • Flute Direction: Right Hand

Exocarb® Diamond High Performance Diamond Coated Ball Mills For Graphite & Non-Ferrous Materials.

  • Diamond (Cvd) Coated Tools Are The Hardestof The Coatings.

Application:It Is Used Exclusively For Applications In Non-Ferrous Materials Such As Aluminum, Graphite, Copper, And Carbon Fiber.

Osg 70300216 Mill Diameter 3/64 In | Number Of Flutes 4 | Length Of Cut 3/16 In | Carbide | 1-1/2 In | Ball End Mill

QTY