OSG 72300416 1/16 in Mill Dia, 3/16 in LOC, 1-1/2 in OAL, 4 Flutes, Carbide, Diamond Coated, Ball End Mill
OSG 72300416
$239.83
/ EA
Out of Stock
- Mill Diameter: 0.0625 in
- Mill Diameter - Decimal: 0.0625 in
- Mill Diameter - Fractional: 1/16 in
- Number of Flutes: 4
- Length of Cut: 0.1875 in
- Material: Carbide
- Overall Length: 1.5 in
- Shank Diameter: 0.125 in
- Shank Diameter - Decimal: 0.125 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.175 mm
- Finish/Coating: Diamond
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 1/16 in
- Cutter Diameter - Fractional: 1/16 in
- Cutting Direction: Right Hand
- Diameter: 1/16 in
- End Type: Ball Nose
- Finish: Diamond Coated
- Flute Type: Spiral
- Length of Cut - Decimal: 0.1875 in
- Length of Cut - Fractional: 3/16 in
- Overall Length - Decimal: 1.5 in
- Overall Length - Fractional: 1-1/2 in
- Series: 7230
- Shank Type: Shrink Fit
- Diameter - Fractional: 1/16 in
- Diameter - Metric: 1.587 mm
- Diameter - Decimal: 0.0625 in
- Flute Direction: Right Hand
Exocarb® Diamond High Performance Diamond Coated Ball Mills For Graphite & Non-Ferrous Materials.
- Diamond (Cvd) Coated Tools Are The Hardestof The Coatings.
Application:It Is Used Exclusively For Applications In Non-Ferrous Materials Such As Aluminum, Graphite, Copper, And Carbon Fiber.
Osg 72300416 Mill Diameter 1/16 In | Number Of Flutes 4 | Length Of Cut 3/16 In | Carbide | 1-1/2 In | Ball End Mill