OSG HP421-0469-BN 3/64 in Mill Dia, 9/64 in LOC, 1-1/2 in OAL, 2 Flutes, Sub-Micrograin Carbide, TiAlN Coated, Ball End Mill
OSG HP421-0469-BN
$36.09
/ EA
- Mill Diameter: 0.0469 in
- Mill Diameter - Decimal: 0.0469 in
- Mill Diameter - Fractional: 3/64 in
- Number of Flutes: 2
- Length of Cut: 0.1406 in
- Material: Carbide
- Overall Length: 1.5 in
- Shank Diameter: 0.125 in
- Shank Diameter - Decimal: 0.125 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.175 mm
- Finish/Coating: TiAlN
- Single or Double End: Single End
- Helix Angle: 35 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 3/64 in
- Cutter Diameter - Fractional: 3/64 in
- Cutting Direction: Right Hand
- Diameter: 3/64 in
- Diameter - Decimal: 0.04687 in
- End Type: Ball Nose
- Finish: TiAlN Coated
- Length of Cut - Decimal: 0.1406 in
- Length of Cut - Fractional: 9/64 in
- Length of Cut - Metric: 3.5712 mm
- Overall Length - Decimal: 1.5 in
- Overall Length - Fractional: 1-1/2 in
- Series: HP421BN
- Shank Type: Shrink Fit
- Type: High Performance
- Flute Type: Spiral
- Diameter - Fractional: 3/64 in
- Diameter - Metric: 1.19 mm
- Flute Direction: Right Hand
The Hy-Pro®-Carb Is An Entire Line Up Of Performance End Mills Designed For Extend Tool Life.
Application:Cast Iron, Carbon Steels, Alloy Steel, Die Steel, Stainless Steel, Hardened Steel < 45 Hrc.
Osg Hp421-0469-Bn Mill Diameter 3/64 In | Number Of Flutes 2 | Length Of Cut 9/64 In | Solid Carbide | 1-1/2 In | Ball End Mill