OSG HP441-5000-BN 1/2 in Mill Dia, 1 in LOC, 3 in OAL, 4 Flutes, Carbide, TiAlN Coated, Ball End Mill
- Mill Diameter: 0.5 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Number of Flutes: 4
- Length of Cut: 1 in
- Material: Carbide
- Overall Length: 3 in
- Shank Diameter: 0.5 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Finish/Coating: TiAlN
- Single or Double End: Single End
- Helix Angle: 35 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 1/2 in
- Cutter Diameter - Fractional: 1/2 in
- Cutting Direction: Right Hand
- Diameter: 1/2 in
- End Type: Ball Nose
- Finish: TiAlN Coated
- Length of Cut - Decimal: 1 in
- Length of Cut - Metric: 25.4 mm
- Overall Length - Decimal: 3 in
- Series: HY-PRO® CARB HP441BN
- Shank Type: Shrink Fit
- Flute Type: Spiral
- Diameter - Fractional: 1/2 in
- Diameter - Metric: 12.7 mm
- Diameter - Decimal: 0.5 in
- Flute Direction: Right Hand
End mills are used to cut and contour molds for plastic parts, which include electric home appliances, die casting dies for automotive parts and stamping molds. To meet today's demanding requirements (smaller size, lower weight and reduced cost), OSG has developed many carbide end mills that are excellent in both processing accuracy and durability.
- Ball nose end mills featuring a full radius are ideally suited for milling 3-D contoured parts
- Performance carbide TiAlN end mills for ferrous and non-ferrous materials
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
OSG End Mill | Ball Nose Center Cutting Performance Regular Length Single End | Series: HY-PRO CARB HP441BN | 1/2 in Cutter Dia | 3 in Overall Length | 1 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 35 deg Helix Angle | Shrink Fit Shank | Carbide | TiAlN Coated