OSG

OSG VG441-6258 5/8 in Milling Dia, 2-1/4 in LOC, 5 in OAL, 4 Flutes, Carbide, TiAlN Coated, Square End Mills

OSG VG441-6258
$358.92 / EA
Product Image
  • Centercutting: Center Cutting
  • Mill Diameter: 5/8 in
  • Mill Diameter - Decimal: 0.625 in
  • Mill Diameter - Fractional: 5/8 in
  • Number of Flutes: 4
  • Length of Cut: 2-1/4 in
  • Material: Carbide
  • Finish/Coating: TiAlN
  • Shank Diameter: 5/8 in
  • Shank Diameter - Decimal: 0.625 in
  • Shank Diameter - Fractional: 5/8 in
  • Shank Diameter - Metric: 15.87 mm
  • Single or Double End: Single End
  • Overall Length: 5 in
  • Flute Direction: Right Hand
  • Cutting Direction: Right Hand
  • Helix Angle: 35 deg
  • Center Cutting: Yes
  • Chipbreaker: No
  • Cutter Diameter: 5/8 in
  • Diameter: 0.197 in
  • Diameter - Decimal: 0.197 in
  • Diameter - Metric: 15.87 mm
  • Finish: TiAlN Coated
  • Flute Type: Muliple Flute
  • Length of Cut - Fractional: 2-1/4 in
  • Material Grade: Micrograin
  • Mill Diameter Tolerance: +0 / -0.0015 in
  • Overall Length - Decimal: 5 in
  • Overall Length - Metric: 5 mm
  • Series: VG441
  • Series/List: VG441
  • Shank Type: Shrink Fit
  • Variable Index: Yes
  • Length Type: Long Length
  • Cutter Diameter - Fractional: 5/8 in
  • Diameter - Fractional: 5/8 in
  • Variable Helix: No

The HY-PRO®-CARB VGx is an entire line up of variable geometry end mills designed to extend tool life and increase metal removal rates by decreasing chatter. Unequal flute spacing breaks up harmonic vibration typically created during milling, enabling cutting performance.

  • Unequal flute spacing
  • Reduces vibration from harmonic vibration, increasing life and enabling more aggressive milling
  • Raised Land Configuration
  • Provides additional stability when taking deeper depths of cut for more consistent performance during roughing
  • TiAIN Coating
  • Provides stable wear resistance in high temperature milling conditions.

Standard/Approvals:Micrograin

Application:Cast iron, Carbon Steels, Alloy Steel, Die Steel, Stainless Steel, Hardened Steel < 45 HRC.Especially advantageous in 300, 400 and PH series Stainless Steels.Stable performance in Nickel Alloys and Cobalt Chrome.Larger sizes available with and without Weldon Flats.

OSG VG441-6258 Mill Diameter 0.6250 in | Number of Flutes 4 | Length of Cut 2-1/4 in | Carbide | TiAlN | Square End Mill

QTY
Add to List