OSG VG541-6250 5/8 in Milling Dia, 3/4 in LOC, 3 in OAL, 5 Flutes, Carbide, TiAlN Coated, Square End Mills
OSG VG541-6250
$254.24
/ EA
- Centercutting: No Center Cutting
- Mill Diameter: 5/8 in
- Mill Diameter - Fractional: 5/8 in
- Number of Flutes: 5
- Length of Cut: 3/4 in
- Material: Carbide
- Finish/Coating: TiAlN Coated
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.87 mm
- Single or Double End: Single End
- Overall Length: 3 in
- Flute Direction: Right Hand
- Cutting Direction: Right Hand
- Helix Angle: 38 deg
- Center Cutting: No
- Chipbreaker: No
- Cutter Diameter: 5/8 in
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Diameter - Metric: 15.87 mm
- Extended Reach: No
- Finish: TiAlN Coated
- Flute Type: Muliple Flute
- Length of Cut - Fractional: 3/4 in
- Length Type: Stub Length
- Material Grade: Micrograin
- Mill Diameter Tolerance: +0 / -0.0015 in
- Overall Length - Decimal: 3 in
- Series: VG541
- Series/List: VG541
- Shank Type: Weldon Flat
- Variable Index: Yes
- Cutter Diameter - Fractional: 5/8 in
- Diameter - Fractional: 5/8 in
- Variable Helix: No
The HY-PRO®-CARB VGx is an entire line up of variable geometry end mills designed to extend tool life and increase metal removal rates by decreasing chatter. Unequal flute spacing breaks up harmonic vibration typically created during milling, enabling cutting performance.
- Unequal flute spacing
- Reduces vibration from harmonic vibration, increasing life and enabling more aggressive milling
- Raised Land Configuration
- Provides additional stability when taking deeper depths of cut for more consistent performance during roughing
- TiAIN Coating
- Provides stable wear resistance in high temperature milling conditions
Application:Cast iron, Carbon Steels, Alloy Steel, Die Steel, Stainless Steel, Hardened Steel < 45 HRC.Especially advantageous in 300, 400 and PH series Stainless Steels.Stable performance in Nickel Alloys and Cobalt Chrome.Larger sizes available with and without Weldon Flats
OSG VG541-6250 Mill Diameter 5/8 in | Number of Flutes 5 | Length of Cut 3/4 in | Carbide | TiAlN | Square End Mill