SGS 32664 55S Fractional High Performance Square End High Performance End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL, TA Coated
- Centercutting: No Center Cutting
- Number of Flutes: 5
- Length of Cut: 1-1/4 in
- Material: Micrograin Solid Carbide
- Finish/Coating: TA Coated
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Overall Length: 3 in
- Cutting Direction: Right Hand
- Helix Angle: 45 deg
- Cutter Diameter: 1/2 in
- Diameter: 0.5 in
- Finish: AlTiN
- Length of Cut - Fractional: 1-1/4 in
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 3 mm
- Series: 55S
- Shank Length: 1-3/4 in
- Shank Length - Fractional: 1-3/4 in
- Shank Type: Straight
- Type: Fractional High Performance Square End
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/2 in
- Diameter - Decimal: 0.5 in
The V-Carb end mill is the finishing touch that you can expect more from. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. Tackle a range of applications with this tool.
- Variable pitch combined with an odd number of flutes suppresses chatter and produces better surface finishes
- Rigid construction minimizes deflection and increases part accuracy
- Optimized tool geometry allows for improved shearing and decreased loads
- Positive rake angle
- External coolant
- Flute spacing unequal
- Applicable materials: steels, stainless steels, cast iron, high temp alloys and titanium
Application: Aerospace, Medical, Power Generation, Automotive, Mold and Die, Castings and Foundries and General Engineering
SGS® High Performance End Mill | Medium Length Variable Geometry Square End | Series: V-Carb™ | 55 | 1/2 in Cutter Dia | 3 in Overall Length | 1-1/4 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | AlTiN Coated