SGS 34975 43B Ball Nose End Fractional High Performance High Performance End Mill, 3/8 in Dia Cutter, 1/2 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 2 in OAL, TB Coated
- Mill Diameter: 0.375 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Number of Flutes: 3
- Length of Cut: 0.5 in
- Material: Carbide
- Overall Length: 2 in
- Shank Diameter: 0.375 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Finish/Coating: TiB2
- Single or Double End: Single End
- Helix Angle: 38 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 3/8 in
- Cutter Diameter - Fractional: 3/8 in
- Cutting Direction: Right Hand
- Extended Reach: No
- Flute Direction: Right Hand
- Length of Cut - Decimal: 0.5 in
- Length of Cut - Fractional: 1/2 in
- Length of Cut - Metric: 12.7 mm
- Overall Length - Decimal: 2 in
- Overall Length - Metric: 50.8 mm
- Series: 43B
- Shank Length: 1-1/2 in
- Shank Length - Fractional: 1-1/2 in
- Shank Type: Straight/HAIMER Safe-Lock
- Type: Ball Nose End Fractional High Performance
- Flute Type: Spiral
S-Carb high performance end mills are designed specifically for aggressive aluminum and non-ferrous machining requiring a high level of material removal. The engineered 3-Flute design effectively manages large quantities of chips produced at high feed rates with lower cutting forces than conventional designs. A circular land stabilizes the tool while cutting and produces an excellent surface finish. With long reach, corner radius and neck options from inventory, there is an S-Carb option for just about every application.
- Solid carbide provides better rigidity than high speed steel
- It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials
- They are used at reduced speeds for general applications on nonferrous metals
- Circular land provides stability with superior surface finishes
- Engineered flute design for effective chip removal at high feed rates
- Many options in number of flutes, reach and end geometry
- Positive rake angle
- External coolant
- Applicable materials: non-ferrous
- +0.0000/-0.00035 in D1, H6 D2 tolerances
Application: Aerospace, Medical, Power Generation, Automotive, Castings, Foundries, General Engineering, Mold and Die
SGS® High Performance End Mill | Ball End Medium Length | Series: S-Carb | 43B | 3/8 in Cutter Dia | 2 in Overall Length | 1/2 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 3/8 in Shank Dia | Right Hand Cutting | 38 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | TiB2 Coated