SGS 36502 ZPB Ball Nose End Fractional High Performance High Performance End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 6 in OAL, TX Coated
- Mill Diameter: 0.75 in
- Mill Diameter - Decimal: 0.75 in
- Mill Diameter - Fractional: 3/4 in
- Mill Diameter - Metric: 19.05 mm
- Number of Flutes: 4
- Length of Cut: 1.5 in
- Material: Carbide
- Overall Length: 6 in
- Shank Diameter: 0.75 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- Finish/Coating: TX
- Single or Double End: Single End
- Helix Angle: 35 - 38 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 3/4 in
- Cutter Diameter - Fractional: 3/4 in
- Cutting Direction: Right Hand
- Extended Reach: No
- Flute Direction: Right Hand
- Length of Cut - Decimal: 1.5 in
- Length of Cut - Fractional: 1-1/2 in
- Length of Cut - Metric: 38.1 mm
- Overall Length - Decimal: 6 in
- Overall Length - Metric: 152.4 mm
- Series: ZPB
- Shank Length: 2-1/2 in
- Shank Length - Fractional: 2-1/2 in
- Shank Type: Straight
- Type: Ball Nose End Fractional High Performance
- Flute Type: Spiral
The Z-Carb-AP offers performance so advanced, it goes way beyond typical high performance carbide end mills. With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics. The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With its patented, one of a kind geometry, the Z-Carb-AP offers three stages of chatter suppression.
- Superior chatter suppression through advanced patented design
- Increase productivity by cutting deeper and wider without harmful harmonics
- Lower cutting forces for dramatically longer tool life
- External coolant
- Flute spacing unequal
- Patented variable rake
- 3-1/2 in reach
- Applicable materials: steels, stainless steels, cast iron, high temp alloys, titanium, non-ferrous, plastic/composites and hardened steels
- +0.0000/-0.002 in D1, H6 D2 tolerances
Application: Aerospace, Medical, Power Generation, Automotive, Mold and Die, Castings and Foundries, General Engineering
SGS® High Performance End Mill | Ball End Long Reach Neck Variable Geometry | Series: Z-Carb™-AP | Z1PLB | 3/4 in Cutter Dia | 6 in Overall Length | 1-1/2 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 3/4 in Shank Dia | Right Hand Cutting | 35 to 38 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | TX Coated