SGS 36543 Z-Carb™ Z1B High Performance Ball End Medium Length End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, AlTiN Coated
- Mill Diameter: 0.5 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Number of Flutes: 4
- Length of Cut: 1 in
- Material: Carbide
- Overall Length: 3 in
- Shank Diameter: 0.5 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Finish/Coating: TX
- Single or Double End: Single End
- Helix Angle: 35 - 38 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 1/2 in
- Cutting Direction: Right Hand
- Extended Reach: No
- Length of Cut - Decimal: 1 in
- Length of Cut - Metric: 25.4 mm
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Series: Z-Carb™ Z1B
- Shank Type: Straight/Weldon Flat
- Type: High Performance Ball End Medium Length
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/2 in
- Flute Direction: Right Hand
The Z-Carb family of end mills maximizes stock removal and improves productivity in most milling applications. The Z-Carb family of end mills are the first and original variable geometry end mill that changed the entire industry. By drastically reducing chatter, increasing tool life and optimizing cost savings, the Z-Carb changed the way we machine forever.
- The first and best chatter resistant end mill on the market
- Optimal material removal rates through increased feed and depths of cut
- Improved surface finish and tool life through controlled consistent performance
- Positive rake angle
- External coolant
- Unequal flute spacing
- Applicable materials: steels, stainless steel, cast iron and titanium
- =0/-0.0020 in D1, H6 D2 tolerances
Application: Aerospace, Medical, Power Generation, Automotive, Mold and Die, Castings and Foundries, General Engineering
SGS® High Performance End Mill | Ball End Medium Length | Series: Z-Carb™ | Z1B | 1/2 in Cutter Dia | 3 in Overall Length | 1 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 35 to 38 deg Helix Angle | Straight/Weldon Flat Shank | Micrograin Solid Carbide | AlTiN Coated