SGS 37095 Z5S High Performance Square End End Mill, 3/4 in Dia Cutter, 7/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL, TM Coated
SGS 37095
$503.68
/ EA
- Centercutting: No Center Cutting
- Number of Flutes: 5
- Length of Cut: 7/8 in
- Material: Carbide
- Finish/Coating: TM Coated
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 195 mm
- Overall Length: 4 in
- Cutting Direction: Right Hand
- Helix Angle: 37 deg
- Cutter Diameter: 3/4 in
- Diameter: 0.75 in
- Finish: Ti-Namite-M
- Flute Type: Spiral
- Length of Cut - Fractional: 7/8 in
- Overall Length - Decimal: 4 in
- Overall Length - Metric: 4 mm
- Series: Z5S
- Shank Length: 3-1/8 in
- Shank Length - Fractional: 3-1/8 in
- Shank Type: Weldon Flat
- Type: High Performance Square End
- Cutter Diameter - Fractional: 3/4 in
- Diameter - Decimal: 0.75 in
- The New Z-Carb HPR five flute roughing end mills are ideal for achieving high material removal rates (MRR) and a finish of 80 RMS or better on most materials
- The specialized five flute
Application: Aerospace Structural Components, Medical Implants, Automotive and Heavy Transportation, Energy and Power Generation, Castings and Forgings and General Engineering
SGS® End Mill | Fractional High Performance Square End | Series: Z5S | 3/4 in Cutter Dia | 4 in Overall Length | 7/8 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 3/4 in Shank Dia | Right Hand Cutting | 37 deg Helix Angle | Weldon Flat Shank | 3.125 in Shank Length | Carbide | TM Coated