Kyocera SGS Precision Tools

SGS 37169 Z5S Fractional High Performance Square End End Mill With Internal Coolant Channel, 7/16 in Dia Cutter, 7/8 in Length of Cut, 5 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, TM Coated

SGS 37169
$152.38 / EA
  • Centercutting: No Center Cutting
  • Number of Flutes: 5
  • Length of Cut: 7/8 in
  • Material: Solid Carbide
  • Finish/Coating: TM Coated
  • Shank Diameter: 7/16 in
  • Shank Diameter - Fractional: 7/16 in
  • Overall Length: 3/4 in
  • Cutting Direction: Right Hand
  • Helix Angle: 37 deg
  • Cutter Diameter: 7/16 in
  • Cutter Diameter - Fractional: 7/16 in
  • Length of Cut - Fractional: 7/8 in
  • Overall Length - Fractional: 3/4 in
  • Series: Z5S
  • Shank Length: 1-7/8 in
  • Shank Length - Fractional: 1-7/8 in
  • Shank Type: Straight
  • Type: Fractional High Performance Square End
  • Flute Type: Spiral
  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter suppression and proprietary edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
  • Recommended for materials
  • Unequal flute spacing
  • Proprietary TI-NAMITE-M ™ coating - high wear resistance, reduced friction, and excellent prevention of edge build up
  • This coating provides superior material removal rates and tool life when used in high performance operations with difficult to machine materials like titanium
  • Applicable on steel, stainless steel, cast iron, high temperature alloys, titanium and hardened steel
  • -0.002 in cutting diameter tolerance
  • H6 shank diameter tolerance
  • Positive rake

SGS® End Mill | High Performance Square End | Series: Z5 Z-Carb-HPR | 7/16 in Cutter Dia | 2-3/4 in Overall Length | 7/16 in | 7/8 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 7/16 in Shank Dia | Right Hand Cutting | 37 deg Helix Angle | Z-Carbide | TM Coated

QTY