SGS 70460 1/2 in Mill Dia, 3 in LOC, 6 in OAL, 4 Flutes, Micrograin Solid Carbide, TX Coated, Ball End Mill

SGS 70460
$316.83 / EA
  • Mill Diameter: 0.5 in
  • Mill Diameter - Decimal: 0.5 in
  • Mill Diameter - Fractional: 1/2 in
  • Mill Diameter - Metric: 12.7 mm
  • Number of Flutes: 4
  • Length of Cut: 3 in
  • Material: Carbide
  • Overall Length: 6 in
  • Shank Diameter: 0.5 in
  • Shank Diameter - Decimal: 0.5 in
  • Shank Diameter - Fractional: 1/2 in
  • Shank Diameter - Metric: 12.7 mm
  • Finish/Coating: TX
  • Single or Double End: Single End
  • Helix Angle: 38 deg
  • Centercutting: Center Cutting
  • Coolant Through: No
  • Cutting Direction: Right Hand
  • Extended Reach: No
  • Length of Cut - Decimal: 3 in
  • Overall Length - Decimal: 6 in
  • Overall Length - Metric: 152.4 mm
  • Flute Direction: Right Hand

The series 7 end mill provides precision performance and high production rates without chatter. This is the tool that can deliver it all in long lengths of cut: chatter suppression, longer tool life, better surface finishes, reduced harmonics and improved side-wall straightness.

  • Variable pitch fluting geometry suppresses chatter and produces better surface finishes
  • Rigid construction minimizes deflection and increases part accuracy
  • Optimized tool geometry increases tool life while strengthening all cutting edges
  • Positive rake angle
  • External coolant
  • Flute spacing unequal
  • Applicable materials: steels, stainless steels, cast iron, high temp alloys and titanium
  • +0.000/-0.002 in D1, H6 D2 tolerences

Application: Aerospace, Medical, Power Generation, Automotive, Castings, Foundries, General Engineering, Mold and Die

SGS® High Performance End Mill | Ball End Extra Long Length Variable Geometry | Series: 7B | 1/2 in Cutter Dia | 6 in Overall Length | 3 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | AlTiN Coated

QTY