YG-1 41039HN Series E1110 Center Cut Regular Length Single End Standard Ball Nose End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-5/16 in OAL, TiN Coated
YG1 41039HN
$28.20
/ EA
Out of Stock
- Mill Diameter: 0.125 in
- Mill Diameter - Decimal: 0.125 in
- Mill Diameter - Fractional: 1/8 in
- Mill Diameter - Metric: 3.175 mm
- Number of Flutes: 2
- Length of Cut: 0.375 in
- Material: High Speed Steel
- Overall Length: 2.3125 in
- Shank Diameter: 0.375 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Finish/Coating: TiN
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutting Direction: Right Hand
- Diameter: 1/8 in
- Diameter - Decimal: 0.125 in
- Diameter - Fractional: 1/8 in
- End Type: Ball Nose
- Finish: TiN
- Flute Direction: Right Hand
- Flute Size: 3/8 in
- Length of Cut - Decimal: 0.375 in
- Length of Cut - Fractional: 3/8 in
- Length of Cut - Metric: 9.525 mm
- Length Type: Regular Length
- Overall Length - Decimal: 2.3125 in
- Overall Length - Fractional: 2-5/16 in
- Overall Length - Metric: 58.74 mm
- Shank Type: Flat
- Diameter - Metric: 3.175 mm
Features and Benefits:
These two flute ball end mills are designed for milling of radius bottom slots, filters and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute design provides good chip removal ability in slotting.
These two flute ball end mills are designed for milling of radius bottom slots, filters and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute design provides good chip removal ability in slotting.