YG-1 41043HN Series E1110 Center Cut Regular Length Single End Standard Ball Nose End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-3/8 in OAL, TiN Coated
YG1 41043HN
$28.20
/ EA
Out of Stock
- Mill Diameter: 0.1875 in
- Mill Diameter - Decimal: 0.1875 in
- Mill Diameter - Fractional: 3/16 in
- Mill Diameter - Metric: 4.7625 mm
- Number of Flutes: 2
- Length of Cut: 0.5 in
- Material: High Speed Steel
- Overall Length: 2.375 in
- Shank Diameter: 0.375 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Finish/Coating: TiN
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutting Direction: Right Hand
- Diameter: 3/16 in
- Diameter - Fractional: 3/16 in
- End Type: Ball Nose
- Flute Size: 1/2 in
- Length of Cut - Decimal: 0.5 in
- Length of Cut - Fractional: 1/2 in
- Length of Cut - Metric: 12.7 mm
- Length Type: Regular Length
- Overall Length - Decimal: 2.375 in
- Overall Length - Fractional: 2-3/8 in
- Overall Length - Metric: 60.325 mm
- Shank Type: Flat
- Diameter - Decimal: 0.1875 in
- Diameter - Metric: 4.762 mm
- Finish: TiN
- Flute Direction: Right Hand
Features and Benefits:
These two flute ball end mills are designed for milling of radius bottom slots, filters and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute design provides good chip removal ability in slotting.
These two flute ball end mills are designed for milling of radius bottom slots, filters and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute design provides good chip removal ability in slotting.