YG-1 41047HN Series E1110 Center Cut Regular Length Single End Standard Ball Nose End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL, TiN Coated
YG1 41047HN
$28.20
/ EA
Out of Stock
- Mill Diameter: 0.25 in
- Mill Diameter - Decimal: 0.25 in
- Mill Diameter - Fractional: 1/4 in
- Mill Diameter - Metric: 6.35 mm
- Number of Flutes: 2
- Length of Cut: 0.625 in
- Material: High Speed Steel
- Overall Length: 2.4375 in
- Shank Diameter: 0.375 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Finish/Coating: TiN
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutting Direction: Right Hand
- Diameter: 1/4 in
- Diameter - Fractional: 1/4 in
- Diameter - Metric: 6.35 mm
- End Type: Ball Nose
- Finish: TiN
- Flute Direction: Right Hand
- Flute Size: 5/8 in
- Length of Cut - Decimal: 0.625 in
- Length of Cut - Fractional: 5/8 in
- Length of Cut - Metric: 15.87 mm
- Length Type: Regular Length
- Overall Length - Decimal: 2.4375 in
- Overall Length - Fractional: 2-7/16 in
- Overall Length - Metric: 61.91 mm
- Shank Type: Flat
- Diameter - Decimal: 0.25 in
Features and Benefits:
These two flute ball end mills are designed for milling of radius bottom slots, filters and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute design provides good chip removal ability in slotting.
These two flute ball end mills are designed for milling of radius bottom slots, filters and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute design provides good chip removal ability in slotting.