YG1 41579 0.3125 in Milling Dia, 0.8125 in LOC, 2.5 in OAL, 2 Flutes, Carbide, Bright, Ball End Mills
YG1 41579
$22.28
/ EA
Out of Stock
- Mill Diameter: 0.3125 in
- Mill Diameter - Decimal: 0.3125 in
- Mill Diameter - Fractional: 5/16 in
- Mill Diameter - Metric: 7.937 mm
- Number of Flutes: 2
- Length of Cut: 0.8125 in
- Material: Carbide
- Overall Length: 2.5 in
- Shank Diameter: 0.3125 in
- Shank Diameter - Decimal: 0.3125 in
- Shank Diameter - Fractional: 5/16 in
- Shank Diameter - Metric: 7.937 mm
- Finish/Coating: Uncoated
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutting Direction: Right Hand
- Diameter: 5/16 in
- End Type: Ball Nose
- Finish: Uncoated
- Flute Type: Finisher
- Length of Cut - Decimal: 0.8125 in
- Length of Cut - Fractional: 13/16 in
- Length of Cut - Metric: 20.64 mm
- Overall Length - Decimal: 2.5 in
- Overall Length - Fractional: 2-1/2 in
- Overall Length - Metric: 63.5 mm
- Series: E5249
- Diameter - Fractional: 5/16 in
- Diameter - Decimal: 0.3125 in
- Diameter - Metric: 7.937 mm
- Flute Direction: Right Hand
Features and Benefits:
Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.