YG-1 60297CC E2170 Coarse Pitch Imperial Regular Length Single End Roughing End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL, TiCN Coated
YG1 60297CC
$41.84
/ EA
Out of Stock
- Mill Diameter: 1/4 in
- Mill Diameter - Decimal: 0.25 in
- Mill Diameter - Fractional: 1/4 in
- Mill Diameter - Metric: 6.35 mm
- Pitch: Coarse
- Length of Cut: 5/8 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiCN-Coated
- Overall Length: 2-7/16 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Length of Cut - Decimal: 0.625 in
- Length of Cut - Fractional: 5/8 in
- Length of Cut - Metric: 15.875 mm
- Number of Flutes: 3
- Overall Length - Decimal: 2.4375 in
- Overall Length - Fractional: 2-7/16 in
- Overall Length - Metric: 61.9125 mm
- Single or Double End: Single End
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.
The end tooth of this tool has a center hole design for many accurate resharpenings between centers.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.
The end tooth of this tool has a center hole design for many accurate resharpenings between centers.