YG-1 70301CN E2079 Fine Pitch Imperial Regular Length Single End Roughing End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, TiN Coated
YG1 70301CN
$52.81
/ EA
Out of Stock
- Mill Diameter: 5/16 in
- Mill Diameter - Decimal: 0.3125 in
- Mill Diameter - Fractional: 5/16 in
- Mill Diameter - Metric: 7.9375 mm
- Pitch: Fine
- Length of Cut: 3/4 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiN-Coated
- Overall Length: 2-1/2 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Diameter: 5/16 in
- Flute Size: 3/4 in
- Flute Type: Rougher
- Length of Cut - Decimal: 0.75 in
- Length of Cut - Fractional: 3/4 in
- Length of Cut - Metric: 19.05 mm
- Length Type: Regular
- Number of Flutes: 3
- Overall Length - Decimal: 2.5 in
- Overall Length - Fractional: 2-1/2 in
- Overall Length - Metric: 63.5 mm
- Shank Type: Flat
- Single or Double End: Single End
- Diameter - Decimal: 0.3125 in
- Diameter - Fractional: 5/16 in
- Diameter - Metric: 7.937 mm
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality