YG-1 70328CE E2079 Fine Pitch Imperial Regular Length Roughing End Mill, 9/16 in Dia Cutter, 1-3/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-3/8 in OAL, TiAlN Extreme Coated
YG1 70328CE
$98.37
/ EA
Out of Stock
- Mill Diameter: 9/16 in
- Mill Diameter - Decimal: 0.5625 in
- Mill Diameter - Fractional: 9/16 in
- Mill Diameter - Metric: 14.28 mm
- Pitch: Fine
- Length of Cut: 1-3/8 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Extreme Coated
- Overall Length: 3-3/8 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Diameter: 9/16 in
- Flute Size: 1-3/8 in
- Flute Type: Rougher
- Length of Cut - Decimal: 1.375 in
- Length of Cut - Fractional: 1-3/8 in
- Length of Cut - Metric: 34.925 mm
- Length Type: Regular
- Number of Flutes: 4
- Overall Length - Decimal: 3.375 in
- Overall Length - Fractional: 3-3/8 in
- Overall Length - Metric: 85.725 mm
- Shank Type: Flat
- Diameter - Fractional: 9/16 in
- Diameter - Decimal: 0.5625 in
- Diameter - Metric: 14.28 mm
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality