YG-1 70328CN E2079 Fine Pitch Imperial Regular Length Single End Roughing End Mill, 9/16 in Dia Cutter, 1-3/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-3/8 in OAL, TiN Coated
YG1 70328CN
$88.21
/ EA
Out of Stock
- Mill Diameter: 9/16 in
- Mill Diameter - Decimal: 0.5625 in
- Mill Diameter - Fractional: 9/16 in
- Mill Diameter - Metric: 14.28 mm
- Pitch: Fine
- Length of Cut: 1-3/8 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiN-Coated
- Overall Length: 3-3/8 in
- Centercutting: Center Cutting
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Length of Cut - Decimal: 1.375 in
- Length of Cut - Fractional: 1-3/8 in
- Length of Cut - Metric: 34.925 mm
- Overall Length - Decimal: 3.375 in
- Overall Length - Fractional: 3-3/8 in
- Overall Length - Metric: 85.725 mm
- Single or Double End: Single End
- Number of Flutes: 4
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality