
YG-1 71337CC E2077 Fine Pitch Imperial Long Length Roughing End Mill, 5/8 in Dia Cutter, 2-1/2 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 4-5/8 in OAL, TiCN Coated
YG1 71337CC
$94.24
/ EA
Out of Stock
- Mill Diameter: 5/8 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.875 mm
- Pitch: Fine
- Length of Cut: 2-1/2 in
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiCN-Coated
- Overall Length: 4-5/8 in
- Centercutting: Center Cutting
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Length of Cut - Decimal: 2.5 in
- Length of Cut - Fractional: 2-1/2 in
- Length of Cut - Metric: 63.5 mm
- Number of Flutes: 4
- Overall Length - Decimal: 4.625 in
- Overall Length - Fractional: 4-5/8 in
- Overall Length - Metric: 117.475 mm
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.