YG-1 73312CF E2248 Regular Length Rougher End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-11/16 in OAL, TiAlN Futura Coated
YG1 73312CF
$52.26
/ EA
Out of Stock
- Mill Diameter: 7/16 in
- Mill Diameter - Decimal: 0.4375 in
- Mill Diameter - Fractional: 7/16 in
- Mill Diameter - Metric: 11.11 mm
- Length of Cut: 1 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Futura Coated
- Overall Length: 2-11/16 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Diameter: 7/16 in
- Length of Cut - Decimal: 1 in
- Length of Cut - Metric: 25.4 mm
- Overall Length - Decimal: 2.6875 in
- Overall Length - Fractional: 2-11/16 in
- Overall Length - Metric: 68.2625 mm
- Shank Type: Flat
- Length Type: Regular Length
- Diameter - Decimal: 0.4375 in
- Diameter - Fractional: 7/16 in
- Diameter - Metric: 11.11 mm
- Number of Flutes: 4
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.