YG-1 73328CC E2248 Center Cut Imperial Regular Length Roughing and Finishing End Mill, 9/16 in Dia Cutter, 1-3/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-3/8 in OAL, TiCN Coated
YG1 73328CC
$74.27
/ EA
Out of Stock
- Mill Diameter: 9/16 in
- Mill Diameter - Decimal: 0.5625 in
- Mill Diameter - Fractional: 9/16 in
- Mill Diameter - Metric: 14.28 mm
- Length of Cut: 1-3/8 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiCN-Coated
- Overall Length: 3-3/8 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Diameter: 9/16 in
- Diameter - Fractional: 9/16 in
- Diameter - Metric: 14.28 mm
- Flute Type: Rougher
- Length of Cut - Decimal: 1.375 in
- Length of Cut - Fractional: 1-3/8 in
- Length of Cut - Metric: 34.925 mm
- Overall Length - Decimal: 3.375 in
- Overall Length - Fractional: 3-3/8 in
- Overall Length - Metric: 85.725 mm
- Shank Type: Flat
- Length Type: Regular Length
- Diameter - Decimal: 0.5625 in
- Number of Flutes: 4
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.