YG-1 73391 E2248 Center Cut Imperial Regular Length Single End Roughing and Finishing End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4-1/8 in OAL, Bright
YG1 73391
$84.27
/ EA
Out of Stock
- Mill Diameter: 7/8 in
- Mill Diameter - Decimal: 0.875 in
- Mill Diameter - Fractional: 7/8 in
- Mill Diameter - Metric: 22.22 mm
- Pitch: Coarse
- Length of Cut: 1-7/8 in
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- Material: HSS-Co8
- Finish/Coating: Bright / Uncoated
- Overall Length: 4-1/8 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Diameter: 7/8 in
- Diameter - Metric: 22.22 mm
- Length of Cut - Decimal: 1.875 in
- Length of Cut - Fractional: 1-7/8 in
- Length of Cut - Metric: 47.625 mm
- Length Type: Regular
- Number of Flutes: 5
- Overall Length - Decimal: 4.125 in
- Overall Length - Fractional: 4-1/8 in
- Overall Length - Metric: 104.775 mm
- Shank Type: Flat
- Single or Double End: Single End
- Diameter - Decimal: 0.875 in
- Diameter - Fractional: 7/8 in
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.